Borehole inclinometer

The digital inclinometer probe is used for section-by-section displacement measurements radial to the axis of the measuring tube. The probe has a base length of 0.5 or 1.0 m. The vertical inclinometer is used in vertical boreholes and the horizontal inclinometer in horizontal boreholes. These probes can be integrated into the system of displacement measurement along lines (combination with measuring cable, measuring rod, reading device, field data acquisition, Trivec and Trical software).

Downloads

ALL REFERENCES

Markus Stolz

Civil Engineer

Member of the extended executive board
Division manager geotechnics /
Geotechnical instrumentation and measurements / hiDCon

T 0041 44 806 29 41
E-Mail

Christoph Mangold

Surveyor

Project Manager Geotechnics

T 0041 44 806 29 50
E-Mail

Médéric Piedevache

Engineering Geologist ENSG

Member of the extended executive board
Branch manager Nancy, France

T 0033 3 83 94 04 50
E-Mail

François Chevalier

Engineering Geologist ENSG

Project Manager
Geotechnical instrumentation and measurements /
French-speaking Switzerland

T 0041 44 806 29 34
E-Mail