Displacement measurement between two points

The following Solexperts® measuring systems, which can be recorded manually or automatically with our data loggers, are available for point measurements of displacements and deformations:

  • Distometer, a portable, high-precision convergence measuring device based on Invar steel wires.
  • Joint extensometers measure displacements across construction joints, construction cracks and on rock surfaces. In addition to displacements perpendicular to the joint surface, shear movements can also be measured.
  • Surface extensometers monitor deformations over measuring ranges between 1 and 6 m. The measuring rods are made of glass-fibre reinforced plastic, steel or invar steel.
  • The portable measuring instruments Curvo- and Deformeter are used to record strain and changes in curvature on component surfaces, e.g. on tunnel segments and steel girders. From this, the acting internal forces (normal force and bending moments) and the load can be concluded.
  • The Clino is a permanently mounted inclinometer, which very precisely measures tilts in structures.
  • The portable clinometer is used to manually measure changes in the inclination of structures with high precision.

Downloads

Geotechnics

Geotechnics
Displacements along profiles
Publications Sliding Micrometer and Trivec
Borehole extensometer
Pile tests
Displacement measurement between two points

ALL REFERENCES

Marcel Hubrig

Ing. Vermessungswesen
Geodetic Engineer

Deputy division manager geotechnics /
Geotechnical instrumentation and measurements /
Geodetic monitoring

T 0041 44 806 29 84
E-Mail

Markus Stolz

Bau-Ing. TU
Civil Engineer

Member of the extended executive board
Division manager geotechnics /
Geotechnical instrumentation and measurements / hiDCon

T 0041 44 806 29 41
E-Mail

Médéric Piedevache

Ing. ENSG
Engineer

Member of the extended executive board
Branch manager Nany, France

T 0033 3 83 94 04 50
E-Mail

Dr. Sebastian Brenne

Geoscientist

Project Manager

T 0049 234 904 4717
E-Mail